Before you try to hang a picture on a plaster wall with nails... STOP!!
Plaster walls have a tendency to crack and crumble when you hammer a nail directly into the them. Self-adhesive picture hanging strips are much quicker and easier to use... And much less likely to cause damage to your walls.
Read on for a step-by-step guide to hanging pictures on plaster without nails or drilling.
Start by weighing your frame to determine how many picture hanging strips you need. VELCRO® Brand HANGables® Picture Hanging Strips come in four different sizes that can hold different weights so make sure you pick the right one:
Small Squares - Up to 500g per set
Strips - Up to 2kg per set
Corners - Up to 6kg per set
Large Rectangles - Up to 7.5kg per set
Next, wipe the wall with a clean, damp cloth to remove any dust or dirt that could reduce the effectiveness of the picture hanging strips.
Now to attach the picture hanging strips to the frame. Place one half of each set in each corner with the arrows facing upwards.
Then pair the sets and press down firmly (without removing the release liner just yet!)
Now remove the release liner and press the frame firmly in position against the wall (we'd recommend using a spirit level at this stage to make sure you hang it straight!)
Press it firmly against the wall for 30-60 seconds before lifting the frame up and off the wall. Leave it for an hour to give the adhesive time to set.
Last but not least, put the frame back on the wall and step back to see your frame hung on a plaster wall without one single nail!
Want to have a go at hanging pictures without nails? Pick up a pack of VELCRO® Brand HANGables® Picture Hanging Strips or stay on our blog for more picture hanging tips!