Araldite® Rapid is a strong, fast-setting epoxy resin adhesive that is suitable for use on metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).
It can be painted or sanded, and is ideal for jobs that require a long-lasting, water-resistant adhesive with a high temperature resistance (-30°C to 80°C).
Note: Do not use on items that will come into contact with food and drink. Not recommended for bonding rear view mirrors to car windscreens.
- Sets in 5 minutes
- Takes 2 hours to reach full strength
- High temperature resistance (-30°C to 80°C)
- Environmentally friendly product formulation
- Eco-friendly packaging for easy recycling
How To Use
This two-part epoxy resin glue is quick and easy to use.
First, make sure both surfaces are clean and free from dust, corrosion, dirt and grease. Then for optimum bonding, degrease metals with a suitable solvent or slightly roughen the surfaces with sandpaper.
To apply the Araldite® Rapid, snap off the resealable cap and depress the syringe to dispense equal amounts of both components onto a clean, disposable surface.
Mix for at least 30 seconds until well mixed and ready to use. Araldite® Rapid is usable for a maximum of five minutes after mixing.
Finally, apply the epoxy resin glue to both surfaces of the joint and assemble carefully, removing any excess adhesive with a sharp blade. Parts will be re-positionable for approximately four minutes.